PowerTek has assisted EPC Contractors and Owners to meet or exceed schedule and financial goals for the following projects:

Provided startup and commissioning personnel to the Kiewit Industrial Company to assist with the startup and commissioning for the El Dorado Combined Cycle Project in Henderson, Nevada.  The project was a Westinghouse 501F Combustion Turbine with a Westinghouse Steam Turbine and a Nooter Eriksen HRSG.  The scope included furnishing the lead Instrument and Controls Engineer for the Westinghouse WDPF Control System and the plant DCS.

Provided Startup Manager, Lead Mechanical and Lead Instrument & Controls Engineer for the AES Barry Project in Barry, Wales, UK.  The project consisted of simple cycle an Ansaldo Energia  (Siemens design) 94.2 Combustion Turbine, a Mitsubishi Steam Turbine, and a Nooter Eriksen HRSG and auxiliary equipment.   PowerTek personnel provided the coordination of startup, commissioning, demonstration, reliability, environmental, performance and environmental testing for the project.  Worked with Mitsubishi, Ansaldo, and Ingersoll Rand personnel on the resolution of equipment performance problems.

Provided the Lead Electrical Startup Engineer, Lead Instrument & Controls Engineer, Controls Startup Engineer and a Mechanical Startup Engineer for the Duke/Fluor Daniel Dearborn Project Phase 1, 3 and 4.  The project consisted of a combined cycle two dual GE 7 FA Combustion Turbine, three Aalborg HRSG blast furnace gas boilers and two Aalborg HRSG’s, ABB Steam turbines and auxiliary equipment.  Power Tek personnel provided Duke/Fluor Daniel with the expertise to complete a difficult project.  

Provided the Lead Instrument and Controls Startup Engineer and Lead Mechanical Startup Engineer for startup, startup support and consulting to Duke/Fluor Daniel for the Ingleside Cogeneration Project in Corpus Christi, Texas.  The unit consisted of two dual GE Frame 7 FA Combustion Turbines and an ABB Steam Turbine.  Provided startup support and revised the schedule and provided input to enhance the time required to complete the overall project. 

Provided a Lead Instrument and Controls Startup Engineer and Lead Mechanical Startup Engineer for startup, startup support and consulting to Duke/Fluor Daniel for the Hildalgo Project in Edinburg, Texas. The unit consisted of GE Frame 7FA Combustion Turbines and an ABB HRSG’s and a GE Steam Turbine.  Provided startup support provided input to enhance the time required to complete the overall project.

Provided a Lead Mechanical Startup Engineer/Assistant Startup Manager for commissioning support and consulting to Duke/Fluor Daniel for the Paris Project in Paris, Texas.  The unit consisted of dual GE Frame 7 FA Combustion Turbines and an Aalborg HRSG’s and a GE Steam Turbine.  Provided startup support and provided input to enhance the time required to complete the overall project.

Provided a Lead Mechanical Startup Engineer/Assistant Startup Manager for startup, and a Mechanical Startup Engineer for commissioning and consulting to Duke/Fluor Daniel for the Guadalupe Power Project in Marion, Texas. The unit consisted of dual GE Frame 7 FA Combustion Turbines and an Aalborg HRSG’s and a GE D-11 Steam Turbine.  Provided startup support and provided input to enhance the time required to complete the overall project.

Provided a Lead Mechanical Startup Engineer/Assistant Startup Manager, Lead Instrument and Controls Startup Engineer, Operations Startup Engineer, Mechanical/ Water Treatment Startup Engineer, and Balance of Plant Mechanical Startup Engineer for commissioning support and consulting to Duke/Fluor Daniel for the Odessa-Ector Power Project in Odessa, Texas. The unit consisted of dual GE Frame 7 FA Combustion Turbines and an Aalborg HRSG’s and a GE D-11 Steam Turbine.  Provided startup support and provided input to enhance the time required to complete the overall project.

Provided a Lead Electrical Startup Engineer for commissioning support and consulting to Duke/Fluor Daniel for the Attala Power Project in Sallis, Mississippi.  The unit consisted of dual GE Frame 7 FA Combustion Turbines and an Aalborg HRSG’s and a GE D-11 Steam Turbine.  Provided startup support and provided input to enhance the time required to complete the overall project.

Provided Lead Electrical Startup Engineer, two Instrument and Control Startup Engineers, an Electrical Startup Engineer, and a Mechanical Startup Engineer for commissioning support and consulting to Duke/Fluor Daniel for the West Georgia Power Project in Thomaston, Georgia. The unit consisted of 4 GE Frame 7 FA Combustion Turbines simple cycle installation and auxiliaries.  Provided startup support and input to enhance the time required to complete the overall project.

Provided Assistant Startup Manager/Lead Electrical Startup Engineer and an Instrument and Startup Engineer for commissioning support and consulting to Duke/Fluor Daniel for the Murray Power Project in Dalton, Georgia. The unit consisted of dual GE Frame 7 FA Combustion Turbines and an Aalborg HRSG’s and a GE D-11 Steam Turbine.  Power Tek provided startup support and input to enhance the time required to complete the overall project.

Provided Assistant Startup Manager/Lead Instrument and Controls Startup Engineer for commissioning support and consulting to Duke/Fluor Daniel for the Bastrop Energy Project in Bastrop, Texas.  The unit consisted of dual GE Frame 7FA Combustion Turbines and an Aalborg HRSG’s and a GE D-11 Steam Turbine.  Providing startup support and input to enhance the time required to complete the overall project.

Provided Assistant Startup Manager/Lead Instrument and Controls Startup Engineer, and Instrument and Controls/DCS Engineer for commissioning support and consulting to Duke/Fluor Daniel for the Arlington Valley Energy Project in Arlington, Arizona. The unit consisted of dual GE Frame 7FA Combustion Turbines and an Aalborg HRSG’s and a GE D-11 Steam Turbine.  Providing startup support and input to enhance the time required to complete the overall project.

Provided Lead Instrument and Controls DCS Startup Engineer, and Instrument and Controls/DCS Engineer for commissioning support and consulting to Duke/Fluor Daniel for the Newington Project in Newington, New Hampshire.  The unit consisted of dual GE Frame 7FA Combustion Turbines and an Aalborg HRSG’s and a GE D-11 Steam Turbine.  Provided startup support and input to enhance the completion of the overall project.